Basic Interior Lighting Course
Start Simple! In this lesson we will illuminate a small warehouse 160x120x18 (dimensions in feet).
Room reflectances are: 70/50/20 (ceiling, walls, floor).
Illuminance requirements are 25 fc initial on a 2.5’ work plane.
We will work through the following steps:
- Define the Luminaire
-
Use Room Estimator to determine luminaire layout
- Export Room Estimator Results to Model Mode
- Calculate using the Direct Only Method (discuss)
- Calculate using the Full Radiosity Method (discuss)
- Advance to Render Mode
- Refine with Adaptive Subdivision (discuss)
- Enable Isolines
- Label Luminaires
- Define Viewpoints in Model Mode
- Define Viewpoints in Render Mode
- Create an Automated Report
At the end of each section you will find a button to advance to the next portion of the course, or return to the previous. You can also always return to this page by clicking the AGi32 icon on the top of the page.
Rescue files are provided at significant points to allow you to catch-up if you have difficulty with a certain portion of the lesson. These positions in the lesson are marked by this icon: